Skip to main content
£0.00 0

Basket

No products in the basket.

Guides & downloads

Project guide

Roof Lantern and Skylight Measuring Guide

The first question is not how big the rooflight should be. It is what the quoted dimensions actually measure. Agree that reference with your installer before ordering.

Three measurements to keep separate

A structural opening is the hole formed in the roof. The internal kerb dimension is measured between the inside faces of the upstand. The external kerb dimension is measured across its outside faces, with any required roof covering included. These can describe the same opening with three different numbers. Label every sketch rather than writing an unqualified “rooflight size”.

Match the reference to the product

Stratus Flat Skylight normally uses internal kerb dimensions. Ultrasky Lantern uses external kerb dimensions. The Korniche Lantern, framed Flat Glass and FlatLite surveying guides specify external upstand measurements including the waterproof membrane. Follow the exact drawing for the product on your quotation; do not transfer a measurement from one designer to another.

A practical survey record

Record width, length, both diagonals, top-of-kerb width, height above the finished roof covering and the direction of fall. Include photographs and a section drawing showing insulation and the roof membrane. Measure in millimetres, and ask the installer to sign off the measurements once the finished build-up is known.

Check fit before ordering

An opening can have the right width and length yet still be out of square or uneven. Do not average conflicting measurements or add your own fitting allowance. Ask the installer to compare the survey with the manufacturer's tolerances and resolve any difference before manufacture.

Final order checklist

Confirm the product name and generation, dimension reference, width/length orientation, glazing, colour and any accessories. Keep one agreed revision of the drawing so the builder, supplier and installer work from the same information. If a measurement changes, ask for an amended confirmation rather than relying on a verbal update.

Find the manufacturer installation PDFs

Choose your product and check its specification

Use the specification for your chosen range, then enter the confirmed measurements and options in its designer. FlatLite configurations are submitted as quotation enquiries.

Need help with your project?

Send us your product choice, dimensions and installer’s drawing so we can help you identify the right specification and documents.

Contact Roof Lantern Kits